1
0
Fork 0
mirror of https://code.forgejo.org/actions/checkout.git synced 2024-11-23 01:44:51 +01:00
checkout/src/git-command-manager.ts

634 lines
18 KiB
TypeScript
Raw Normal View History

import * as core from '@actions/core'
import * as exec from '@actions/exec'
Add support for sparse checkouts (#1369) * Add support for sparse checkouts * sparse-checkout: optionally turn off cone mode While it _is_ true that cone mode is the default nowadays (mainly for performance reasons: code mode is much faster than non-cone mode), there _are_ legitimate use cases where non-cone mode is really useful. Let's add a flag to optionally disable cone mode. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Verify minimum Git version for sparse checkout The `git sparse-checkout` command is available only since Git version v2.25.0. The `actions/checkout` Action actually supports older Git versions than that; As of time of writing, the minimum version is v2.18.0. Instead of raising this minimum version even for users who do not require a sparse checkout, only check for this minimum version specifically when a sparse checkout was asked for. Suggested-by: Tingluo Huang <tingluohuang@github.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Support sparse checkout/LFS better Instead of fetching all the LFS objects present in the current revision in a sparse checkout, whether they are needed inside the sparse cone or not, let's instead only pull the ones that are actually needed. To do that, let's avoid running that preemptive `git lfs fetch` call in case of a sparse checkout. An alternative that was considered during the development of this patch (and ultimately rejected) was to use `git lfs pull --include <path>...`, but it turned out to be too inflexible because it requires exact paths, not the patterns that are available via the sparse checkout definition, and that risks running into command-line length limitations. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> --------- Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Co-authored-by: Daniel <daniel.fernandez@feverup.com>
2023-06-09 15:08:21 +02:00
import * as fs from 'fs'
import * as fshelper from './fs-helper'
import * as io from '@actions/io'
import * as path from 'path'
import * as refHelper from './ref-helper'
2020-03-05 20:21:59 +01:00
import * as regexpHelper from './regexp-helper'
import * as retryHelper from './retry-helper'
import {GitVersion} from './git-version'
// Auth header not supported before 2.9
// Wire protocol v2 not supported before 2.18
// sparse-checkout not [well-]supported before 2.28 (see https://github.com/actions/checkout/issues/1386)
export const MinimumGitVersion = new GitVersion('2.18')
export const MinimumGitSparseCheckoutVersion = new GitVersion('2.28')
export interface IGitCommandManager {
branchDelete(remote: boolean, branch: string): Promise<void>
branchExists(remote: boolean, pattern: string): Promise<boolean>
branchList(remote: boolean): Promise<string[]>
disableSparseCheckout(): Promise<void>
Add support for sparse checkouts (#1369) * Add support for sparse checkouts * sparse-checkout: optionally turn off cone mode While it _is_ true that cone mode is the default nowadays (mainly for performance reasons: code mode is much faster than non-cone mode), there _are_ legitimate use cases where non-cone mode is really useful. Let's add a flag to optionally disable cone mode. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Verify minimum Git version for sparse checkout The `git sparse-checkout` command is available only since Git version v2.25.0. The `actions/checkout` Action actually supports older Git versions than that; As of time of writing, the minimum version is v2.18.0. Instead of raising this minimum version even for users who do not require a sparse checkout, only check for this minimum version specifically when a sparse checkout was asked for. Suggested-by: Tingluo Huang <tingluohuang@github.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Support sparse checkout/LFS better Instead of fetching all the LFS objects present in the current revision in a sparse checkout, whether they are needed inside the sparse cone or not, let's instead only pull the ones that are actually needed. To do that, let's avoid running that preemptive `git lfs fetch` call in case of a sparse checkout. An alternative that was considered during the development of this patch (and ultimately rejected) was to use `git lfs pull --include <path>...`, but it turned out to be too inflexible because it requires exact paths, not the patterns that are available via the sparse checkout definition, and that risks running into command-line length limitations. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> --------- Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Co-authored-by: Daniel <daniel.fernandez@feverup.com>
2023-06-09 15:08:21 +02:00
sparseCheckout(sparseCheckout: string[]): Promise<void>
sparseCheckoutNonConeMode(sparseCheckout: string[]): Promise<void>
checkout(ref: string, startPoint: string): Promise<void>
checkoutDetach(): Promise<void>
2020-03-05 20:21:59 +01:00
config(
configKey: string,
configValue: string,
2021-11-01 17:43:18 +01:00
globalConfig?: boolean,
add?: boolean
2020-03-05 20:21:59 +01:00
): Promise<void>
configExists(configKey: string, globalConfig?: boolean): Promise<boolean>
Add support for sparse checkouts (#1369) * Add support for sparse checkouts * sparse-checkout: optionally turn off cone mode While it _is_ true that cone mode is the default nowadays (mainly for performance reasons: code mode is much faster than non-cone mode), there _are_ legitimate use cases where non-cone mode is really useful. Let's add a flag to optionally disable cone mode. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Verify minimum Git version for sparse checkout The `git sparse-checkout` command is available only since Git version v2.25.0. The `actions/checkout` Action actually supports older Git versions than that; As of time of writing, the minimum version is v2.18.0. Instead of raising this minimum version even for users who do not require a sparse checkout, only check for this minimum version specifically when a sparse checkout was asked for. Suggested-by: Tingluo Huang <tingluohuang@github.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Support sparse checkout/LFS better Instead of fetching all the LFS objects present in the current revision in a sparse checkout, whether they are needed inside the sparse cone or not, let's instead only pull the ones that are actually needed. To do that, let's avoid running that preemptive `git lfs fetch` call in case of a sparse checkout. An alternative that was considered during the development of this patch (and ultimately rejected) was to use `git lfs pull --include <path>...`, but it turned out to be too inflexible because it requires exact paths, not the patterns that are available via the sparse checkout definition, and that risks running into command-line length limitations. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> --------- Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Co-authored-by: Daniel <daniel.fernandez@feverup.com>
2023-06-09 15:08:21 +02:00
fetch(
refSpec: string[],
options: {
filter?: string
fetchDepth?: number
fetchTags?: boolean
showProgress?: boolean
Add support for sparse checkouts (#1369) * Add support for sparse checkouts * sparse-checkout: optionally turn off cone mode While it _is_ true that cone mode is the default nowadays (mainly for performance reasons: code mode is much faster than non-cone mode), there _are_ legitimate use cases where non-cone mode is really useful. Let's add a flag to optionally disable cone mode. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Verify minimum Git version for sparse checkout The `git sparse-checkout` command is available only since Git version v2.25.0. The `actions/checkout` Action actually supports older Git versions than that; As of time of writing, the minimum version is v2.18.0. Instead of raising this minimum version even for users who do not require a sparse checkout, only check for this minimum version specifically when a sparse checkout was asked for. Suggested-by: Tingluo Huang <tingluohuang@github.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Support sparse checkout/LFS better Instead of fetching all the LFS objects present in the current revision in a sparse checkout, whether they are needed inside the sparse cone or not, let's instead only pull the ones that are actually needed. To do that, let's avoid running that preemptive `git lfs fetch` call in case of a sparse checkout. An alternative that was considered during the development of this patch (and ultimately rejected) was to use `git lfs pull --include <path>...`, but it turned out to be too inflexible because it requires exact paths, not the patterns that are available via the sparse checkout definition, and that risks running into command-line length limitations. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> --------- Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Co-authored-by: Daniel <daniel.fernandez@feverup.com>
2023-06-09 15:08:21 +02:00
}
): Promise<void>
getDefaultBranch(repositoryUrl: string): Promise<string>
getWorkingDirectory(): string
init(): Promise<void>
isDetached(): Promise<boolean>
lfsFetch(ref: string): Promise<void>
lfsInstall(): Promise<void>
log1(format?: string): Promise<string>
remoteAdd(remoteName: string, remoteUrl: string): Promise<void>
2020-03-05 20:21:59 +01:00
removeEnvironmentVariable(name: string): void
revParse(ref: string): Promise<string>
setEnvironmentVariable(name: string, value: string): void
shaExists(sha: string): Promise<boolean>
2020-03-05 20:21:59 +01:00
submoduleForeach(command: string, recursive: boolean): Promise<string>
submoduleSync(recursive: boolean): Promise<void>
submoduleUpdate(fetchDepth: number, recursive: boolean): Promise<void>
submoduleStatus(): Promise<boolean>
tagExists(pattern: string): Promise<boolean>
tryClean(): Promise<boolean>
2020-03-05 20:21:59 +01:00
tryConfigUnset(configKey: string, globalConfig?: boolean): Promise<boolean>
tryDisableAutomaticGarbageCollection(): Promise<boolean>
tryGetFetchUrl(): Promise<string>
tryReset(): Promise<boolean>
version(): Promise<GitVersion>
}
export async function createCommandManager(
workingDirectory: string,
Add support for sparse checkouts (#1369) * Add support for sparse checkouts * sparse-checkout: optionally turn off cone mode While it _is_ true that cone mode is the default nowadays (mainly for performance reasons: code mode is much faster than non-cone mode), there _are_ legitimate use cases where non-cone mode is really useful. Let's add a flag to optionally disable cone mode. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Verify minimum Git version for sparse checkout The `git sparse-checkout` command is available only since Git version v2.25.0. The `actions/checkout` Action actually supports older Git versions than that; As of time of writing, the minimum version is v2.18.0. Instead of raising this minimum version even for users who do not require a sparse checkout, only check for this minimum version specifically when a sparse checkout was asked for. Suggested-by: Tingluo Huang <tingluohuang@github.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Support sparse checkout/LFS better Instead of fetching all the LFS objects present in the current revision in a sparse checkout, whether they are needed inside the sparse cone or not, let's instead only pull the ones that are actually needed. To do that, let's avoid running that preemptive `git lfs fetch` call in case of a sparse checkout. An alternative that was considered during the development of this patch (and ultimately rejected) was to use `git lfs pull --include <path>...`, but it turned out to be too inflexible because it requires exact paths, not the patterns that are available via the sparse checkout definition, and that risks running into command-line length limitations. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> --------- Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Co-authored-by: Daniel <daniel.fernandez@feverup.com>
2023-06-09 15:08:21 +02:00
lfs: boolean,
doSparseCheckout: boolean
): Promise<IGitCommandManager> {
Add support for sparse checkouts (#1369) * Add support for sparse checkouts * sparse-checkout: optionally turn off cone mode While it _is_ true that cone mode is the default nowadays (mainly for performance reasons: code mode is much faster than non-cone mode), there _are_ legitimate use cases where non-cone mode is really useful. Let's add a flag to optionally disable cone mode. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Verify minimum Git version for sparse checkout The `git sparse-checkout` command is available only since Git version v2.25.0. The `actions/checkout` Action actually supports older Git versions than that; As of time of writing, the minimum version is v2.18.0. Instead of raising this minimum version even for users who do not require a sparse checkout, only check for this minimum version specifically when a sparse checkout was asked for. Suggested-by: Tingluo Huang <tingluohuang@github.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Support sparse checkout/LFS better Instead of fetching all the LFS objects present in the current revision in a sparse checkout, whether they are needed inside the sparse cone or not, let's instead only pull the ones that are actually needed. To do that, let's avoid running that preemptive `git lfs fetch` call in case of a sparse checkout. An alternative that was considered during the development of this patch (and ultimately rejected) was to use `git lfs pull --include <path>...`, but it turned out to be too inflexible because it requires exact paths, not the patterns that are available via the sparse checkout definition, and that risks running into command-line length limitations. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> --------- Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Co-authored-by: Daniel <daniel.fernandez@feverup.com>
2023-06-09 15:08:21 +02:00
return await GitCommandManager.createCommandManager(
workingDirectory,
lfs,
doSparseCheckout
)
}
class GitCommandManager {
private gitEnv = {
GIT_TERMINAL_PROMPT: '0', // Disable git prompt
GCM_INTERACTIVE: 'Never' // Disable prompting for git credential manager
}
private gitPath = ''
private lfs = false
Add support for sparse checkouts (#1369) * Add support for sparse checkouts * sparse-checkout: optionally turn off cone mode While it _is_ true that cone mode is the default nowadays (mainly for performance reasons: code mode is much faster than non-cone mode), there _are_ legitimate use cases where non-cone mode is really useful. Let's add a flag to optionally disable cone mode. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Verify minimum Git version for sparse checkout The `git sparse-checkout` command is available only since Git version v2.25.0. The `actions/checkout` Action actually supports older Git versions than that; As of time of writing, the minimum version is v2.18.0. Instead of raising this minimum version even for users who do not require a sparse checkout, only check for this minimum version specifically when a sparse checkout was asked for. Suggested-by: Tingluo Huang <tingluohuang@github.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Support sparse checkout/LFS better Instead of fetching all the LFS objects present in the current revision in a sparse checkout, whether they are needed inside the sparse cone or not, let's instead only pull the ones that are actually needed. To do that, let's avoid running that preemptive `git lfs fetch` call in case of a sparse checkout. An alternative that was considered during the development of this patch (and ultimately rejected) was to use `git lfs pull --include <path>...`, but it turned out to be too inflexible because it requires exact paths, not the patterns that are available via the sparse checkout definition, and that risks running into command-line length limitations. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> --------- Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Co-authored-by: Daniel <daniel.fernandez@feverup.com>
2023-06-09 15:08:21 +02:00
private doSparseCheckout = false
private workingDirectory = ''
private gitVersion: GitVersion = new GitVersion()
// Private constructor; use createCommandManager()
private constructor() {}
async branchDelete(remote: boolean, branch: string): Promise<void> {
const args = ['branch', '--delete', '--force']
if (remote) {
args.push('--remote')
}
args.push(branch)
await this.execGit(args)
}
async branchExists(remote: boolean, pattern: string): Promise<boolean> {
const args = ['branch', '--list']
if (remote) {
args.push('--remote')
}
args.push(pattern)
const output = await this.execGit(args)
return !!output.stdout.trim()
}
async branchList(remote: boolean): Promise<string[]> {
const result: string[] = []
// Note, this implementation uses "rev-parse --symbolic-full-name" because the output from
// "branch --list" is more difficult when in a detached HEAD state.
// TODO(https://github.com/actions/checkout/issues/786): this implementation uses
// "rev-parse --symbolic-full-name" because there is a bug
// in Git 2.18 that causes "rev-parse --symbolic" to output symbolic full names. When
// 2.18 is no longer supported, we can switch back to --symbolic.
const args = ['rev-parse', '--symbolic-full-name']
if (remote) {
args.push('--remotes=origin')
} else {
args.push('--branches')
}
const stderr: string[] = []
const errline: string[] = []
const stdout: string[] = []
const stdline: string[] = []
const listeners = {
stderr: (data: Buffer) => {
stderr.push(data.toString())
},
errline: (data: Buffer) => {
errline.push(data.toString())
},
stdout: (data: Buffer) => {
stdout.push(data.toString())
},
stdline: (data: Buffer) => {
stdline.push(data.toString())
}
}
// Suppress the output in order to avoid flooding annotations with innocuous errors.
await this.execGit(args, false, true, listeners)
core.debug(`stderr callback is: ${stderr}`)
core.debug(`errline callback is: ${errline}`)
core.debug(`stdout callback is: ${stdout}`)
core.debug(`stdline callback is: ${stdline}`)
for (let branch of stdline) {
branch = branch.trim()
if (!branch) {
continue
}
if (branch.startsWith('refs/heads/')) {
branch = branch.substring('refs/heads/'.length)
} else if (branch.startsWith('refs/remotes/')) {
branch = branch.substring('refs/remotes/'.length)
}
result.push(branch)
}
return result
}
async disableSparseCheckout(): Promise<void> {
await this.execGit(['sparse-checkout', 'disable'])
}
Add support for sparse checkouts (#1369) * Add support for sparse checkouts * sparse-checkout: optionally turn off cone mode While it _is_ true that cone mode is the default nowadays (mainly for performance reasons: code mode is much faster than non-cone mode), there _are_ legitimate use cases where non-cone mode is really useful. Let's add a flag to optionally disable cone mode. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Verify minimum Git version for sparse checkout The `git sparse-checkout` command is available only since Git version v2.25.0. The `actions/checkout` Action actually supports older Git versions than that; As of time of writing, the minimum version is v2.18.0. Instead of raising this minimum version even for users who do not require a sparse checkout, only check for this minimum version specifically when a sparse checkout was asked for. Suggested-by: Tingluo Huang <tingluohuang@github.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Support sparse checkout/LFS better Instead of fetching all the LFS objects present in the current revision in a sparse checkout, whether they are needed inside the sparse cone or not, let's instead only pull the ones that are actually needed. To do that, let's avoid running that preemptive `git lfs fetch` call in case of a sparse checkout. An alternative that was considered during the development of this patch (and ultimately rejected) was to use `git lfs pull --include <path>...`, but it turned out to be too inflexible because it requires exact paths, not the patterns that are available via the sparse checkout definition, and that risks running into command-line length limitations. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> --------- Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Co-authored-by: Daniel <daniel.fernandez@feverup.com>
2023-06-09 15:08:21 +02:00
async sparseCheckout(sparseCheckout: string[]): Promise<void> {
await this.execGit(['sparse-checkout', 'set', ...sparseCheckout])
}
async sparseCheckoutNonConeMode(sparseCheckout: string[]): Promise<void> {
await this.execGit(['config', 'core.sparseCheckout', 'true'])
const output = await this.execGit([
'rev-parse',
'--git-path',
'info/sparse-checkout'
])
const sparseCheckoutPath = path.join(
this.workingDirectory,
output.stdout.trimRight()
)
await fs.promises.appendFile(
sparseCheckoutPath,
`\n${sparseCheckout.join('\n')}\n`
)
}
async checkout(ref: string, startPoint: string): Promise<void> {
const args = ['checkout', '--progress', '--force']
if (startPoint) {
args.push('-B', ref, startPoint)
} else {
args.push(ref)
}
await this.execGit(args)
}
async checkoutDetach(): Promise<void> {
const args = ['checkout', '--detach']
await this.execGit(args)
}
2020-03-05 20:21:59 +01:00
async config(
configKey: string,
configValue: string,
2021-11-01 17:43:18 +01:00
globalConfig?: boolean,
add?: boolean
2020-03-05 20:21:59 +01:00
): Promise<void> {
2021-11-01 17:43:18 +01:00
const args: string[] = ['config', globalConfig ? '--global' : '--local']
if (add) {
args.push('--add')
}
args.push(...[configKey, configValue])
await this.execGit(args)
}
2020-03-05 20:21:59 +01:00
async configExists(
configKey: string,
globalConfig?: boolean
): Promise<boolean> {
const pattern = regexpHelper.escape(configKey)
const output = await this.execGit(
2020-03-05 20:21:59 +01:00
[
'config',
globalConfig ? '--global' : '--local',
'--name-only',
'--get-regexp',
pattern
],
true
)
return output.exitCode === 0
}
Add support for sparse checkouts (#1369) * Add support for sparse checkouts * sparse-checkout: optionally turn off cone mode While it _is_ true that cone mode is the default nowadays (mainly for performance reasons: code mode is much faster than non-cone mode), there _are_ legitimate use cases where non-cone mode is really useful. Let's add a flag to optionally disable cone mode. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Verify minimum Git version for sparse checkout The `git sparse-checkout` command is available only since Git version v2.25.0. The `actions/checkout` Action actually supports older Git versions than that; As of time of writing, the minimum version is v2.18.0. Instead of raising this minimum version even for users who do not require a sparse checkout, only check for this minimum version specifically when a sparse checkout was asked for. Suggested-by: Tingluo Huang <tingluohuang@github.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Support sparse checkout/LFS better Instead of fetching all the LFS objects present in the current revision in a sparse checkout, whether they are needed inside the sparse cone or not, let's instead only pull the ones that are actually needed. To do that, let's avoid running that preemptive `git lfs fetch` call in case of a sparse checkout. An alternative that was considered during the development of this patch (and ultimately rejected) was to use `git lfs pull --include <path>...`, but it turned out to be too inflexible because it requires exact paths, not the patterns that are available via the sparse checkout definition, and that risks running into command-line length limitations. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> --------- Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Co-authored-by: Daniel <daniel.fernandez@feverup.com>
2023-06-09 15:08:21 +02:00
async fetch(
refSpec: string[],
options: {
filter?: string
fetchDepth?: number
fetchTags?: boolean
showProgress?: boolean
}
Add support for sparse checkouts (#1369) * Add support for sparse checkouts * sparse-checkout: optionally turn off cone mode While it _is_ true that cone mode is the default nowadays (mainly for performance reasons: code mode is much faster than non-cone mode), there _are_ legitimate use cases where non-cone mode is really useful. Let's add a flag to optionally disable cone mode. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Verify minimum Git version for sparse checkout The `git sparse-checkout` command is available only since Git version v2.25.0. The `actions/checkout` Action actually supports older Git versions than that; As of time of writing, the minimum version is v2.18.0. Instead of raising this minimum version even for users who do not require a sparse checkout, only check for this minimum version specifically when a sparse checkout was asked for. Suggested-by: Tingluo Huang <tingluohuang@github.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Support sparse checkout/LFS better Instead of fetching all the LFS objects present in the current revision in a sparse checkout, whether they are needed inside the sparse cone or not, let's instead only pull the ones that are actually needed. To do that, let's avoid running that preemptive `git lfs fetch` call in case of a sparse checkout. An alternative that was considered during the development of this patch (and ultimately rejected) was to use `git lfs pull --include <path>...`, but it turned out to be too inflexible because it requires exact paths, not the patterns that are available via the sparse checkout definition, and that risks running into command-line length limitations. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> --------- Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Co-authored-by: Daniel <daniel.fernandez@feverup.com>
2023-06-09 15:08:21 +02:00
): Promise<void> {
const args = ['-c', 'protocol.version=2', 'fetch']
if (!refSpec.some(x => x === refHelper.tagsRefSpec) && !options.fetchTags) {
args.push('--no-tags')
}
args.push('--prune', '--no-recurse-submodules')
if (options.showProgress) {
args.push('--progress')
}
Add support for sparse checkouts (#1369) * Add support for sparse checkouts * sparse-checkout: optionally turn off cone mode While it _is_ true that cone mode is the default nowadays (mainly for performance reasons: code mode is much faster than non-cone mode), there _are_ legitimate use cases where non-cone mode is really useful. Let's add a flag to optionally disable cone mode. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Verify minimum Git version for sparse checkout The `git sparse-checkout` command is available only since Git version v2.25.0. The `actions/checkout` Action actually supports older Git versions than that; As of time of writing, the minimum version is v2.18.0. Instead of raising this minimum version even for users who do not require a sparse checkout, only check for this minimum version specifically when a sparse checkout was asked for. Suggested-by: Tingluo Huang <tingluohuang@github.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Support sparse checkout/LFS better Instead of fetching all the LFS objects present in the current revision in a sparse checkout, whether they are needed inside the sparse cone or not, let's instead only pull the ones that are actually needed. To do that, let's avoid running that preemptive `git lfs fetch` call in case of a sparse checkout. An alternative that was considered during the development of this patch (and ultimately rejected) was to use `git lfs pull --include <path>...`, but it turned out to be too inflexible because it requires exact paths, not the patterns that are available via the sparse checkout definition, and that risks running into command-line length limitations. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> --------- Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Co-authored-by: Daniel <daniel.fernandez@feverup.com>
2023-06-09 15:08:21 +02:00
if (options.filter) {
args.push(`--filter=${options.filter}`)
}
if (options.fetchDepth && options.fetchDepth > 0) {
args.push(`--depth=${options.fetchDepth}`)
} else if (
fshelper.fileExistsSync(
path.join(this.workingDirectory, '.git', 'shallow')
)
) {
args.push('--unshallow')
}
args.push('origin')
for (const arg of refSpec) {
args.push(arg)
}
const that = this
await retryHelper.execute(async () => {
await that.execGit(args)
})
}
async getDefaultBranch(repositoryUrl: string): Promise<string> {
let output: GitOutput | undefined
await retryHelper.execute(async () => {
output = await this.execGit([
'ls-remote',
'--quiet',
'--exit-code',
'--symref',
repositoryUrl,
'HEAD'
])
})
if (output) {
// Satisfy compiler, will always be set
for (let line of output.stdout.trim().split('\n')) {
line = line.trim()
if (line.startsWith('ref:') || line.endsWith('HEAD')) {
return line
.substr('ref:'.length, line.length - 'ref:'.length - 'HEAD'.length)
.trim()
}
}
}
throw new Error('Unexpected output when retrieving default branch')
}
getWorkingDirectory(): string {
return this.workingDirectory
}
async init(): Promise<void> {
await this.execGit(['init', this.workingDirectory])
}
async isDetached(): Promise<boolean> {
// Note, "branch --show-current" would be simpler but isn't available until Git 2.22
const output = await this.execGit(
['rev-parse', '--symbolic-full-name', '--verify', '--quiet', 'HEAD'],
true
)
return !output.stdout.trim().startsWith('refs/heads/')
}
async lfsFetch(ref: string): Promise<void> {
const args = ['lfs', 'fetch', 'origin', ref]
const that = this
await retryHelper.execute(async () => {
await that.execGit(args)
})
}
async lfsInstall(): Promise<void> {
await this.execGit(['lfs', 'install', '--local'])
}
async log1(format?: string): Promise<string> {
const args = format ? ['log', '-1', format] : ['log', '-1']
const silent = format ? false : true
const output = await this.execGit(args, false, silent)
return output.stdout
}
async remoteAdd(remoteName: string, remoteUrl: string): Promise<void> {
await this.execGit(['remote', 'add', remoteName, remoteUrl])
}
2020-03-05 20:21:59 +01:00
removeEnvironmentVariable(name: string): void {
delete this.gitEnv[name]
}
/**
* Resolves a ref to a SHA. For a branch or lightweight tag, the commit SHA is returned.
* For an annotated tag, the tag SHA is returned.
2020-07-14 15:23:30 +02:00
* @param {string} ref For example: 'refs/heads/main' or '/refs/tags/v1'
* @returns {Promise<string>}
*/
async revParse(ref: string): Promise<string> {
const output = await this.execGit(['rev-parse', ref])
return output.stdout.trim()
}
setEnvironmentVariable(name: string, value: string): void {
this.gitEnv[name] = value
}
async shaExists(sha: string): Promise<boolean> {
const args = ['rev-parse', '--verify', '--quiet', `${sha}^{object}`]
const output = await this.execGit(args, true)
return output.exitCode === 0
}
2020-03-05 20:21:59 +01:00
async submoduleForeach(command: string, recursive: boolean): Promise<string> {
const args = ['submodule', 'foreach']
if (recursive) {
args.push('--recursive')
}
args.push(command)
const output = await this.execGit(args)
return output.stdout
}
async submoduleSync(recursive: boolean): Promise<void> {
const args = ['submodule', 'sync']
if (recursive) {
args.push('--recursive')
}
await this.execGit(args)
}
async submoduleUpdate(fetchDepth: number, recursive: boolean): Promise<void> {
const args = ['-c', 'protocol.version=2']
args.push('submodule', 'update', '--init', '--force')
if (fetchDepth > 0) {
args.push(`--depth=${fetchDepth}`)
}
if (recursive) {
args.push('--recursive')
}
await this.execGit(args)
}
async submoduleStatus(): Promise<boolean> {
const output = await this.execGit(['submodule', 'status'], true)
core.debug(output.stdout)
return output.exitCode === 0
}
async tagExists(pattern: string): Promise<boolean> {
const output = await this.execGit(['tag', '--list', pattern])
return !!output.stdout.trim()
}
async tryClean(): Promise<boolean> {
const output = await this.execGit(['clean', '-ffdx'], true)
return output.exitCode === 0
}
2020-03-05 20:21:59 +01:00
async tryConfigUnset(
configKey: string,
globalConfig?: boolean
): Promise<boolean> {
const output = await this.execGit(
2020-03-05 20:21:59 +01:00
[
'config',
globalConfig ? '--global' : '--local',
'--unset-all',
configKey
],
true
)
return output.exitCode === 0
}
async tryDisableAutomaticGarbageCollection(): Promise<boolean> {
2019-12-12 19:49:26 +01:00
const output = await this.execGit(
['config', '--local', 'gc.auto', '0'],
true
)
return output.exitCode === 0
}
async tryGetFetchUrl(): Promise<string> {
const output = await this.execGit(
2019-12-12 19:49:26 +01:00
['config', '--local', '--get', 'remote.origin.url'],
true
)
if (output.exitCode !== 0) {
return ''
}
const stdout = output.stdout.trim()
if (stdout.includes('\n')) {
return ''
}
return stdout
}
async tryReset(): Promise<boolean> {
const output = await this.execGit(['reset', '--hard', 'HEAD'], true)
return output.exitCode === 0
}
async version(): Promise<GitVersion> {
return this.gitVersion
}
static async createCommandManager(
workingDirectory: string,
Add support for sparse checkouts (#1369) * Add support for sparse checkouts * sparse-checkout: optionally turn off cone mode While it _is_ true that cone mode is the default nowadays (mainly for performance reasons: code mode is much faster than non-cone mode), there _are_ legitimate use cases where non-cone mode is really useful. Let's add a flag to optionally disable cone mode. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Verify minimum Git version for sparse checkout The `git sparse-checkout` command is available only since Git version v2.25.0. The `actions/checkout` Action actually supports older Git versions than that; As of time of writing, the minimum version is v2.18.0. Instead of raising this minimum version even for users who do not require a sparse checkout, only check for this minimum version specifically when a sparse checkout was asked for. Suggested-by: Tingluo Huang <tingluohuang@github.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Support sparse checkout/LFS better Instead of fetching all the LFS objects present in the current revision in a sparse checkout, whether they are needed inside the sparse cone or not, let's instead only pull the ones that are actually needed. To do that, let's avoid running that preemptive `git lfs fetch` call in case of a sparse checkout. An alternative that was considered during the development of this patch (and ultimately rejected) was to use `git lfs pull --include <path>...`, but it turned out to be too inflexible because it requires exact paths, not the patterns that are available via the sparse checkout definition, and that risks running into command-line length limitations. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> --------- Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Co-authored-by: Daniel <daniel.fernandez@feverup.com>
2023-06-09 15:08:21 +02:00
lfs: boolean,
doSparseCheckout: boolean
): Promise<GitCommandManager> {
const result = new GitCommandManager()
Add support for sparse checkouts (#1369) * Add support for sparse checkouts * sparse-checkout: optionally turn off cone mode While it _is_ true that cone mode is the default nowadays (mainly for performance reasons: code mode is much faster than non-cone mode), there _are_ legitimate use cases where non-cone mode is really useful. Let's add a flag to optionally disable cone mode. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Verify minimum Git version for sparse checkout The `git sparse-checkout` command is available only since Git version v2.25.0. The `actions/checkout` Action actually supports older Git versions than that; As of time of writing, the minimum version is v2.18.0. Instead of raising this minimum version even for users who do not require a sparse checkout, only check for this minimum version specifically when a sparse checkout was asked for. Suggested-by: Tingluo Huang <tingluohuang@github.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Support sparse checkout/LFS better Instead of fetching all the LFS objects present in the current revision in a sparse checkout, whether they are needed inside the sparse cone or not, let's instead only pull the ones that are actually needed. To do that, let's avoid running that preemptive `git lfs fetch` call in case of a sparse checkout. An alternative that was considered during the development of this patch (and ultimately rejected) was to use `git lfs pull --include <path>...`, but it turned out to be too inflexible because it requires exact paths, not the patterns that are available via the sparse checkout definition, and that risks running into command-line length limitations. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> --------- Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Co-authored-by: Daniel <daniel.fernandez@feverup.com>
2023-06-09 15:08:21 +02:00
await result.initializeCommandManager(
workingDirectory,
lfs,
doSparseCheckout
)
return result
}
private async execGit(
args: string[],
allowAllExitCodes = false,
silent = false,
customListeners = {}
): Promise<GitOutput> {
fshelper.directoryExistsSync(this.workingDirectory, true)
const result = new GitOutput()
const env = {}
for (const key of Object.keys(process.env)) {
env[key] = process.env[key]
}
for (const key of Object.keys(this.gitEnv)) {
env[key] = this.gitEnv[key]
}
const defaultListener = {
stdout: (data: Buffer) => {
stdout.push(data.toString())
}
}
const mergedListeners = {...defaultListener, ...customListeners}
const stdout: string[] = []
const options = {
cwd: this.workingDirectory,
env,
silent,
ignoreReturnCode: allowAllExitCodes,
listeners: mergedListeners
}
result.exitCode = await exec.exec(`"${this.gitPath}"`, args, options)
result.stdout = stdout.join('')
core.debug(result.exitCode.toString())
core.debug(result.stdout)
return result
}
private async initializeCommandManager(
workingDirectory: string,
Add support for sparse checkouts (#1369) * Add support for sparse checkouts * sparse-checkout: optionally turn off cone mode While it _is_ true that cone mode is the default nowadays (mainly for performance reasons: code mode is much faster than non-cone mode), there _are_ legitimate use cases where non-cone mode is really useful. Let's add a flag to optionally disable cone mode. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Verify minimum Git version for sparse checkout The `git sparse-checkout` command is available only since Git version v2.25.0. The `actions/checkout` Action actually supports older Git versions than that; As of time of writing, the minimum version is v2.18.0. Instead of raising this minimum version even for users who do not require a sparse checkout, only check for this minimum version specifically when a sparse checkout was asked for. Suggested-by: Tingluo Huang <tingluohuang@github.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Support sparse checkout/LFS better Instead of fetching all the LFS objects present in the current revision in a sparse checkout, whether they are needed inside the sparse cone or not, let's instead only pull the ones that are actually needed. To do that, let's avoid running that preemptive `git lfs fetch` call in case of a sparse checkout. An alternative that was considered during the development of this patch (and ultimately rejected) was to use `git lfs pull --include <path>...`, but it turned out to be too inflexible because it requires exact paths, not the patterns that are available via the sparse checkout definition, and that risks running into command-line length limitations. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> --------- Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Co-authored-by: Daniel <daniel.fernandez@feverup.com>
2023-06-09 15:08:21 +02:00
lfs: boolean,
doSparseCheckout: boolean
): Promise<void> {
this.workingDirectory = workingDirectory
// Git-lfs will try to pull down assets if any of the local/user/system setting exist.
// If the user didn't enable `LFS` in their pipeline definition, disable LFS fetch/checkout.
this.lfs = lfs
if (!this.lfs) {
this.gitEnv['GIT_LFS_SKIP_SMUDGE'] = '1'
}
this.gitPath = await io.which('git', true)
// Git version
core.debug('Getting git version')
this.gitVersion = new GitVersion()
let gitOutput = await this.execGit(['version'])
let stdout = gitOutput.stdout.trim()
if (!stdout.includes('\n')) {
const match = stdout.match(/\d+\.\d+(\.\d+)?/)
if (match) {
this.gitVersion = new GitVersion(match[0])
}
}
if (!this.gitVersion.isValid()) {
throw new Error('Unable to determine git version')
}
// Minimum git version
if (!this.gitVersion.checkMinimum(MinimumGitVersion)) {
throw new Error(
`Minimum required git version is ${MinimumGitVersion}. Your git ('${this.gitPath}') is ${this.gitVersion}`
)
}
if (this.lfs) {
// Git-lfs version
core.debug('Getting git-lfs version')
let gitLfsVersion = new GitVersion()
const gitLfsPath = await io.which('git-lfs', true)
gitOutput = await this.execGit(['lfs', 'version'])
stdout = gitOutput.stdout.trim()
if (!stdout.includes('\n')) {
const match = stdout.match(/\d+\.\d+(\.\d+)?/)
if (match) {
gitLfsVersion = new GitVersion(match[0])
}
}
if (!gitLfsVersion.isValid()) {
throw new Error('Unable to determine git-lfs version')
}
// Minimum git-lfs version
// Note:
// - Auth header not supported before 2.1
const minimumGitLfsVersion = new GitVersion('2.1')
if (!gitLfsVersion.checkMinimum(minimumGitLfsVersion)) {
throw new Error(
`Minimum required git-lfs version is ${minimumGitLfsVersion}. Your git-lfs ('${gitLfsPath}') is ${gitLfsVersion}`
)
}
}
Add support for sparse checkouts (#1369) * Add support for sparse checkouts * sparse-checkout: optionally turn off cone mode While it _is_ true that cone mode is the default nowadays (mainly for performance reasons: code mode is much faster than non-cone mode), there _are_ legitimate use cases where non-cone mode is really useful. Let's add a flag to optionally disable cone mode. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Verify minimum Git version for sparse checkout The `git sparse-checkout` command is available only since Git version v2.25.0. The `actions/checkout` Action actually supports older Git versions than that; As of time of writing, the minimum version is v2.18.0. Instead of raising this minimum version even for users who do not require a sparse checkout, only check for this minimum version specifically when a sparse checkout was asked for. Suggested-by: Tingluo Huang <tingluohuang@github.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Support sparse checkout/LFS better Instead of fetching all the LFS objects present in the current revision in a sparse checkout, whether they are needed inside the sparse cone or not, let's instead only pull the ones that are actually needed. To do that, let's avoid running that preemptive `git lfs fetch` call in case of a sparse checkout. An alternative that was considered during the development of this patch (and ultimately rejected) was to use `git lfs pull --include <path>...`, but it turned out to be too inflexible because it requires exact paths, not the patterns that are available via the sparse checkout definition, and that risks running into command-line length limitations. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> --------- Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Co-authored-by: Daniel <daniel.fernandez@feverup.com>
2023-06-09 15:08:21 +02:00
this.doSparseCheckout = doSparseCheckout
if (this.doSparseCheckout) {
if (!this.gitVersion.checkMinimum(MinimumGitSparseCheckoutVersion)) {
Add support for sparse checkouts (#1369) * Add support for sparse checkouts * sparse-checkout: optionally turn off cone mode While it _is_ true that cone mode is the default nowadays (mainly for performance reasons: code mode is much faster than non-cone mode), there _are_ legitimate use cases where non-cone mode is really useful. Let's add a flag to optionally disable cone mode. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Verify minimum Git version for sparse checkout The `git sparse-checkout` command is available only since Git version v2.25.0. The `actions/checkout` Action actually supports older Git versions than that; As of time of writing, the minimum version is v2.18.0. Instead of raising this minimum version even for users who do not require a sparse checkout, only check for this minimum version specifically when a sparse checkout was asked for. Suggested-by: Tingluo Huang <tingluohuang@github.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Support sparse checkout/LFS better Instead of fetching all the LFS objects present in the current revision in a sparse checkout, whether they are needed inside the sparse cone or not, let's instead only pull the ones that are actually needed. To do that, let's avoid running that preemptive `git lfs fetch` call in case of a sparse checkout. An alternative that was considered during the development of this patch (and ultimately rejected) was to use `git lfs pull --include <path>...`, but it turned out to be too inflexible because it requires exact paths, not the patterns that are available via the sparse checkout definition, and that risks running into command-line length limitations. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> --------- Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Co-authored-by: Daniel <daniel.fernandez@feverup.com>
2023-06-09 15:08:21 +02:00
throw new Error(
`Minimum Git version required for sparse checkout is ${MinimumGitSparseCheckoutVersion}. Your git ('${this.gitPath}') is ${this.gitVersion}`
Add support for sparse checkouts (#1369) * Add support for sparse checkouts * sparse-checkout: optionally turn off cone mode While it _is_ true that cone mode is the default nowadays (mainly for performance reasons: code mode is much faster than non-cone mode), there _are_ legitimate use cases where non-cone mode is really useful. Let's add a flag to optionally disable cone mode. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Verify minimum Git version for sparse checkout The `git sparse-checkout` command is available only since Git version v2.25.0. The `actions/checkout` Action actually supports older Git versions than that; As of time of writing, the minimum version is v2.18.0. Instead of raising this minimum version even for users who do not require a sparse checkout, only check for this minimum version specifically when a sparse checkout was asked for. Suggested-by: Tingluo Huang <tingluohuang@github.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> * Support sparse checkout/LFS better Instead of fetching all the LFS objects present in the current revision in a sparse checkout, whether they are needed inside the sparse cone or not, let's instead only pull the ones that are actually needed. To do that, let's avoid running that preemptive `git lfs fetch` call in case of a sparse checkout. An alternative that was considered during the development of this patch (and ultimately rejected) was to use `git lfs pull --include <path>...`, but it turned out to be too inflexible because it requires exact paths, not the patterns that are available via the sparse checkout definition, and that risks running into command-line length limitations. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> --------- Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Co-authored-by: Daniel <daniel.fernandez@feverup.com>
2023-06-09 15:08:21 +02:00
)
}
}
// Set the user agent
const gitHttpUserAgent = `git/${this.gitVersion} (github-actions-checkout)`
core.debug(`Set git useragent to: ${gitHttpUserAgent}`)
this.gitEnv['GIT_HTTP_USER_AGENT'] = gitHttpUserAgent
}
}
class GitOutput {
stdout = ''
exitCode = 0
}